AEROSPACE  HOME   CONTACT  SERVICES  HISTORY  LOCATION  LINKS
  THE STANDARD IN ENVIRONMENTAL TESTING EXCELLENCE
.........
.
MIL-S-901D(NAVY) standard Navy Shock Testing Machine for Lightweight Equipment. Designed for equipment weighing up to 300 pounds.

This test is primarily used to simulate the shock resulting from the explosion of warheads and influence mines. Used to test shipboard electronic and mechanical devices.
.
MIL-S-901 High-Impact Shock Machine for Lightweight Shock
Equipment

High-Impact Shock Machine for Lightweight Shock. 
Two 400 pound hammers, one swinging in a vertical arc and the other dropping vertically. The anvil plate can be turned to present either its back or side edge to the swinging hammer. Each hammer can be raised to a vertical height of 5 ft. above its impact position for a maximum energy input capability of 2000 ft-lb.

 

.
  BACK TO MILITARY STANDARDS PAGE

.

lf.gif (836 bytes)

  YOUR SOURCE FOR ENVIRONMENTAL TESTING EXCELLENCE

rt1.gif (845 bytes)

Contact     |    Services    |    History     |    Location    |    Links    |    Home

Aerospace Testing Corporation
4303 Aerospace Road S.E.
Roanoke, Virginia 24014- 6115
Phone: (540) 427- 4303
    Fax: (540) 427- 1639

Copyright 2001 Aerospace Testing Corporation  All rights reserved.